Te Hiko Wao Teitei A-ringa E8815-G Te haumaru i te taika werohia nga mea pau
He pai mo te reanga kotahi o te koranu koranu rino whakarewa i roto i nga miihini hanga.
Ko te paerewa i tutakihia e matou: GB/T32533 E8815-G, AWS, ISO18275-A, ISO 18275-B.
He aha nga
āhuatanga?
●Te iti o te konutai hauwai hiko, te pewa pumau, te pakaru iti.
●He pai te hanga, ngawari te tango.
●He pai te mahi X-ray.
●Snga taonga miihini tepu.
Tawhā Hua
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | V |
| GB/T RULES | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | - | - | ≥0.20 | ≥0.10 |
| Nga Ture AWS | - | - | - | - | - | - | - | - | - | - |
| UARA TAUIRA | 0.056 | 1.56 | 0.25 | 0.92 | 2.52 | 0.28 | 0.010 | 0.005 | 0.020 | 0.01 |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WHAKAMAHI ℃xh | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | |||||
| GB/T RULES | 780 | 880 | AW | - | 12 | |||||
| Nga Ture AWS | - | - | - | - | - | |||||
| UARA TAUIRA | 843 | 949 | AW | 51/-50 | 20 | |||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | ||||||
| TE HIKO (Amp) | H/W | 80-110 | 100-130 | 130-180 | 180-230 | |||||
| O/W | 50-80 | 90-120 | 130-160 | - | ||||||
Titiro ki te huarahi
kawe matou
●Te kawe waka
●Te tuku
Titiro ki
to tatou warenouse
Nga kaupapa
kei te whakauru tatou
●Shandong Nuclear Power CV20
●Xinjiang Kela 2 Te kaupapa tipu maimoatanga pokapū
Ko o maatau hua
ki te ao
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | V |
| GB/T RULES | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | - | - | ≥0.20 | ≥0.10 |
| Nga Ture AWS | - | - | - | - | - | - | - | - | - | - |
| UARA TAUIRA | 0.056 | 1.56 | 0.25 | 0.92 | 2.52 | 0.28 | 0.010 | 0.005 | 0.020 | 0.01 |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WHAKAMAHI ℃xh | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | |||||
| GB/T RULES | 780 | 880 | AW | - | 12 | |||||
| Nga Ture AWS | - | - | - | - | - | |||||
| UARA TAUIRA | 843 | 949 | AW | 51/-50 | 20 | |||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | ||||||
| TE HIKO (Amp) | H/W | 80-110 | 100-130 | 130-180 | 180-230 | |||||
| O/W | 50-80 | 90-120 | 130-160 | - | ||||||
Tuhia to korero ki konei ka tukuna mai ki a matou