、Nga maitai koranu iti-a-ringa E8018-C1 nga mahi tito weld
KAUPAPA KAUPAPA:
KONO(wt%) | C | Mn | Si | Ni | Cr | Mo | P | S |
GB/T RULES | 0.12 | 1.25 | 0.80 | 2.00-2.75 | - | - | 0.03 | 0.03 |
Nga Ture AWS | 0.12 | 1.25 | 0.80 | 2.00-2.75 | - | - | 0.03 | 0.03 |
UARA TAUIRA | 0.055 | 0.85 | 0.32 | 2.2 | 0.023 | 0.11 | 0.007 | 0.006 |
TE KAUPAPA MAHI:
WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | Te maimoatanga wera°Cxh | |||||
GB/T RULES | 460 | 550 | 27/-60 | 17 | 605*1 | |||||
Nga Ture AWS | 460 | 550 | 27/-60 | 19 | 605*1 | |||||
UARA TAUIRA | 475 | 580 | 95/-60 | 26 | 605*1 |
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
NGĀ WHAKATAKITANGA (mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | ||||
TE HIKO (Amp) | H/W | 80-110 | 100-130 | 130-180 | 170-210 | |||
O/W | 60-100 | 80-120 | 120-160 | - |
Rino paura iti hauwai momo pāhare hiko hiko ringa.
Na te taapiri o te paura rino, he nui ake te pai o te whakarewatanga, he pai rawa atu te paanui o te whakarewanga whakarewa i te -60 ℃ te pāmahana mahi.
Pewa pumau, iti te pakaru, pai te hanga, ngawari te tango para, he pai te mahi X-Ray.
Kohuatanga taputapu
9,000 tana matū
Sanmen Whare Hiri Hirihi
KAUPAPA KAUPAPA:
KONO(wt%) | C | Mn | Si | Ni | Cr | Mo | P | S |
GB/T RULES | 0.12 | 1.25 | 0.80 | 2.00-2.75 | - | - | 0.03 | 0.03 |
Nga Ture AWS | 0.12 | 1.25 | 0.80 | 2.00-2.75 | - | - | 0.03 | 0.03 |
UARA TAUIRA | 0.055 | 0.85 | 0.32 | 2.2 | 0.023 | 0.11 | 0.007 | 0.006 |
TE KAUPAPA MAHI:
WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | Te maimoatanga wera°Cxh | |||||
GB/T RULES | 460 | 550 | 27/-60 | 17 | 605*1 | |||||
Nga Ture AWS | 460 | 550 | 27/-60 | 19 | 605*1 | |||||
UARA TAUIRA | 475 | 580 | 95/-60 | 26 | 605*1 |
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
NGĀ WHAKATAKITANGA (mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | ||||
TE HIKO (Amp) | H/W | 80-110 | 100-130 | 130-180 | 170-210 | |||
O/W | 60-100 | 80-120 | 120-160 | - |
Tuhia to korero ki konei ka tukuna mai ki a matou