Kowiri tira Waea Waea Waea Waea E316LT1-1/4 LNG waka nga ipu para fehokotaki.
HANGARAU WELDING
Kaua e tukua nga patai
Ka mau tonu ki a koe
Te koretake o te pewa
Te hanga hangai kino
Te kohukohu nui
He pai mo te petrochemical, te oko pehanga, te miihini kai, te miihini hauora, te tongi matū me etahi atu ahumahi, te whakapiri 18% Cr-12% Ni-2% Mo te kowiri tira (SUS316, SUS316L, me etahi atu).
He nui te ferrite kei roto i te whakarewa weld, a he iti te kapiti o te kapiti
Ripple pai
Na te nui o te ihirangi Mo, he pai te aukati waikura; all-turanga fehokotaki'anga
-196°C he pai rawa te uaua o te pāmahana iti, e tika ana mo nga taika rokiroki iti, nga ipu me etahi atu taputapu wera iti: te pewa ngawari me te pumau, te iti o te pupuhi, te ahua ataahua, te tango i te para, te whangai waea pumau, me te pai o te mahi tukanga
Te tapawha ngawari
Tawhā Hua
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Ētahi atu |
| GB/T RULES | 0.018 | 0.51 | 1.30 | 0.02 | 0.003 | 12 | 17.5 | 2.5 | Cu:0.01 |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | Whakaroa/% | WARA WHAKAMAHI J/℃ | Te maimoatanga wera °C*h | |||||
| GB/T RULES | - | 560 | 40 | 34/-196 | - | |||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 1.2 | 1.6 | |||
| Ngaohiko(Volt) | 20-36 | 24-38 | |||
| Hiko(Amp) | 120-260 | 200-300 | |||
| Tere(mm/mene) | 15-25 | 18-25 | |||
| Te roa totoro maroke(mm) | 15-25 | 15-25 |
Tautoko wheketere
He pai te hua mo a
te whānuitanga o nga tono
HANGARAU WELDING
-
Xinjiang Kela 2
Kaupapa tipu maimoatanga pokapū
-
Gansu Lanke Petrochemical -50 ℃
kaupapa taika porowhita porowhita
-
Whakawera pehanga teitei o
Hangzhou Boiler Group Co. LTD
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Ētahi atu |
| GB/T RULES | 0.018 | 0.51 | 1.30 | 0.02 | 0.003 | 12 | 17.5 | 2.5 | Cu:0.01 |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | Whakaroa/% | WARA WHAKAMAHI J/℃ | Te maimoatanga wera °C*h | |||||
| GB/T RULES | - | 560 | 40 | 34/-196 | - | |||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 1.2 | 1.6 | |||
| Ngaohiko(Volt) | 20-36 | 24-38 | |||
| Hiko(Amp) | 120-260 | 200-300 | |||
| Tere(mm/mene) | 15-25 | 18-25 | |||
| Te roa totoro maroke(mm) | 15-25 | 15-25 |
