Kowiri tira Hiko A-ringa E310-15 petrochemical whakamahine me te hiko whakauru matū
HANGARAU WELDING
Kaua e tukua nga patai
Ka mau tonu ki a koe
Te koretake o te pewa
Te hanga hangai kino
Te kohukohu nui
He pai mo nga hua teitei o te pāmahana
penei i te oumu wera teitei, taputapu coking waro,
Ka taea hoki te whakamahi mo nga taonga rereke rereke.
Te hauwai iti parakore austenitic kowiri tira
hiko ringa, ko te hanganga matua ko 25%Cr-20%Ni.
Ripple pai
Te mahi pāmahana teitei,
Ka taea te whakamahi ki te taiao 1150C
He pai te mahi fehokotaki'anga, tino pai te parenga ahi,
pai te porosity ātete, pūmau āhuatanga pūkaha o whakarewa whakarewa.
Te tapawha ngawari
Tawhā Hua
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Ētahi atu |
| GB/T RULES | 0.102 | 1.66 | 0.4 | 0.27 | 0.005 | 21.8 | 25.6 | 0.06 | 0.10 | - |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | Te maimoatanga wera °C*h | ||||
| GB/T RULES | 595 | 34 | - | - | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
| TE HIKO (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
| O/W | 20-50 | 45-80 | 70-110 | 90-135 | - | |||||
Tautoko wheketere
He pai te hua mo a
te whānuitanga o nga tono
HANGARAU WELDING
Harbin hiko
toru kuwaha CMT
-
CJ50
whakawiri koki
-
Xinjiang Kela 2 Central
kaupapa tipu maimoatanga
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Ētahi atu |
| GB/T RULES | 0.102 | 1.66 | 0.4 | 0.27 | 0.005 | 21.8 | 25.6 | 0.06 | 0.10 | - |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | Te maimoatanga wera °C*h | ||||
| GB/T RULES | 595 | 34 | - | - | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
| TE HIKO (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
| O/W | 20-50 | 45-80 | 70-110 | 90-135 | - | |||||
