Kowiri tira Hiko A-ringa E318-16 ore poti weld
HANGARAU WELDING
Kaua e tukua nga patai
Ka mau tonu ki a koe
Te koretake o te pewa
Te koretake o te pewa
Te koretake o te pewa
Te momo konupūmā Titaniumkowiri tira hiko hiko
Ko te waahanga matua ko 18% Cr- 12% Ni-2% Mo-Nb
Ripple pai
He pai te whakapai ake i te aukati waikura,
whakapai ake te mahi waikura intergranular
He pai mo te whakapiri o te waikawa pungatara me te hanga waikawa nitric ranei te rokiroki me te taputapu kawe.
Te tapawha ngawari
Tawhā Hua
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | atu | |
| GB/T RULES | 0.08 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | Cu0.75/Nb:6C-1.0 | |
| Nga Ture AWS | 0.08 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | Cu0.75/Nb:6C-1.0 | |
| UARA TAUIRA | 0.032 | 1.65 | 0.71 | 18.5 | 11.5 | 2.5 | 0.026 | 0.004 | Cu0.17/Nb0.42 | |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | - | 550 | - | 20 | ||||
| Nga Ture AWS | - | 550 | - | 25 | ||||
| UARA TAUIRA | - | 635 | 37/-196 | 35 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
| TE HIKO (Amp) | H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
| O/W | 20-50 | 45-80 | 70-110 | 90-135 | - | |||||
Tautoko wheketere
He pai te hua mo a
te whānuitanga o nga tono
HANGARAU WELDING
Hudong LNG kawe
kaupapa YAMAL LNG
Shandong Nuclear Power CV20
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu |
| GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 |
| Nga Ture AWS | 0.04 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 |
| UARA TAUIRA | 0.037 | 1.53 | 0.65 | 17.6 | 13.8 | 2.2 | 0.026 | 0.003 | 0.11 |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | - | 490 | - | 25 | ||||
| Nga Ture AWS | - | 490 | - | 30 | ||||
| UARA TAUIRA | - | 570 | 37/-196 | 38 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
| TE HIKO (Amp) | H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
| O/W | 20-50 | 45-80 | 70-110 | 90-135 | - | |||||
Tuhia to korero ki konei ka tukuna mai ki a matou