Kowiri tira SAW waea fehokotaki'anga ER316 me flux hononga Fehokotaki'anga
HANGARAU WELDING
Kaua e tukua nga patai
Ka mau tonu ki a koe
Te koretake o te pewa
Te hanga hangai kino
Te kohukohu nui
He pai mo te ahumahi petrochemical, oko pehanga
He iti te pāmahana tank rokiroki, tongi, Urea, mihini kai me etahi atu ahumahi.
Ripple pai
18%Cr-12%Ni-2%Mo he kowiri tira (SUS316, me etahi atu)
He pai te weldability, kapiti tairongo me te waikura ātete
Te tapawha ngawari
Tawhā Hua
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
| GB/T RULES | 0.035 | 0.65 | 1.5 | 0.025 | 0.002 | 12.6 | 18.6 | 2.2 |
TE KAUPAPA MAHI:
| WHAI | Te kaha o te toronga(Mpa) | Whakaroa/% | WARA WHAKAMAHI J/℃ | Te waikura intergranular | ||||
| GB/T RULES | 580 | 37 | ≥31/-196 | Kua paahitia te tikanga GB/T4334E | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.4 | 3.2 | 4.0 | ||||
| Volt | 28-32 | 28-32 | 28-32 | ||||
| Amp | 270-360 | 400-550 | 500-650 | ||||
| Tere(mm/min) | 250-320 | 300-420 | 400-480 | ||||
| Whakaroa maroke(mm) | 20-24 | 22-26 | 30-34 |
Tautoko wheketere
He pai te hua mo a
te whānuitanga o nga tono
HANGARAU WELDING
-
Ko nga rauemi whakapiri mo nga konumohe konumohe
-
9,000 tana matū
-
Sino-Ruhia ki mua ki te rawhiti
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
| GB/T RULES | 0.035 | 0.65 | 1.5 | 0.025 | 0.002 | 12.6 | 18.6 | 2.2 |
TE KAUPAPA MAHI:
| WHAI | Te kaha o te toronga(Mpa) | Whakaroa/% | WARA WHAKAMAHI J/℃ | Te waikura intergranular | ||||
| GB/T RULES | 580 | 37 | ≥31/-196 | Kua paahitia te tikanga GB/T4334E | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.4 | 3.2 | 4.0 | ||||
| Volt | 28-32 | 28-32 | 28-32 | ||||
| Amp | 270-360 | 400-550 | 500-650 | ||||
| Tere(mm/min) | 250-320 | 300-420 | 400-480 | ||||
| Whakaroa maroke(mm) | 20-24 | 22-26 | 30-34 |
Tuhia to korero ki konei ka tukuna mai ki a matou