Kowiri tira SAW waea fehokotaki'anga ER316L me flux hanga fehokotaki'anga
HANGARAU WELDING
Kaua e tukua nga patai
Ka mau tonu ki a koe
Te koretake o te pewa
Te hanga hangai kino
Te kohukohu nui
He pai mo te ahumahi petrochemical,
oko pehanga, tank rokiroki pāmahana iti
He tongi, he Urea, he miihini kai me etahi atu ahumahi.
Ripple pai
Waro iti 18%Cr-12%Ni-2%Mo he kowiri tira (SUS316, me etahi atu)
He pai te weldability kapiti tairongo me te waikura.
Te tapawha ngawari
Tawhā Hua
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
| GB/T RULES | 0.015 | 0.76 | 1.65 | 0.024 | 0.002 | 12.6 | 18.4 | 2.3 |
TE KAUPAPA MAHI:
| WHAI | Te kaha o te toronga(Mpa) | Whakaroa/% | WARA WHAKAMAHI J/℃ | Te waikura intergranular | ||||
| GB/T RULES | 580 | 37 | ≥31/-196 | Kua paahitia te tikanga GB/T4334E | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.4 | 3.2 | 4.0 | ||||
| Volt | 28-32 | 28-32 | 28-32 | ||||
| Amp | 270-360 | 400-550 | 500-650 | ||||
| Tere(mm/min) | 250-320 | 300-420 | 400-480 | ||||
| Whakaroa maroke(mm) | 20-24 | 22-26 | 30-34 |
Tautoko wheketere
He pai te hua mo a
te whānuitanga o nga tono
HANGARAU WELDING
-
kaupapa YAMAL LNG
-
Shandong Te mana karihi CV20
-
Ko nga taonga weriweri mo nga waka tereina
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
| GB/T RULES | 0.015 | 0.76 | 1.65 | 0.024 | 0.002 | 12.6 | 18.4 | 2.3 |
TE KAUPAPA MAHI:
| WHAI | Te kaha o te toronga(Mpa) | Whakaroa/% | WARA WHAKAMAHI J/℃ | Te waikura intergranular | ||||
| GB/T RULES | 580 | 37 | ≥31/-196 | Kua paahitia te tikanga GB/T4334E | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.4 | 3.2 | 4.0 | ||||
| Volt | 28-32 | 28-32 | 28-32 | ||||
| Amp | 270-360 | 400-550 | 500-650 | ||||
| Tere(mm/min) | 250-320 | 300-420 | 400-480 | ||||
| Whakaroa maroke(mm) | 20-24 | 22-26 | 30-34 |
Tuhia to korero ki konei ka tukuna mai ki a matou