Nga tira waro teitei Te hiko hiko E7018-1 He mea hiri
He pai mo te WELDING OF CARBON STEEL ME TE KAUPAPA KAUPAPA KAUPAPA, ME TE KAUPAPA KAUPAPA O TE WHAKAMAHI KAIHI KAIHI, TE HANGA, TE PIRITI ME etahi atu Hanganga, PAI KI TE Q345.
Ko te paerewa i tutakihia e matou: GB/T5117 E5018-1, AWS A5.1 E7018-1 & A5.1M E4918-1, ISO2560-A:E 42 5 B 3 2 H5, ISO 2560-B: E4918-1 A.
He aha nga
āhuatanga?
●Te paura rino te iti o te hauwai momo hiko hiko, te pai o te whakapiri, te pewa pumau.
●He ataahua te hanga, he korikori, he iti te pakaru, he ngawari te whakakore, he pai te kiri o te raau taero ki te ahi, he pai te aukati stomatal.
●Nga taonga miihini pumau.
●He pai te kirihou me te iti o te paanga o te pāmahana.
Tawhā Hua
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
| GB/T RULES | 0.15 | 1.60 | 0.90 | 0.20 | 0.30 | 0.30 | 0.035 | 0.035 | 0.08 |
| Nga Ture AWS | 0.15 | 1.60 | 0.75 | 0.20 | 0.30 | 0.30 | 0.035 | 0.035 | 0.08 |
| UARA TAUIRA | 0.065 | 1.40 | 0.45 | 0.03 | 0.01 | 0.006 | 0.011 | 0.007 | 0.01 |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WHAKAMAHI ℃xh | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | 400 | 490 | AW | 27/-45 | 20 | ||||
| Nga Ture AWS | 400 | 490 | AW | 27/-45 | 22 | ||||
| UARA TAUIRA | 490 | 590 | AW | 128/-45 | 28 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | |||||
| TE HIKO (Amp) | H/W | 80-110 | 100-130 | 130-180 | 180-230 | ||||
| O/W | 50-80 | 90-120 | 130-160 | - | |||||
Titiro ki te huarahi
kawe matou
●Te kawe waka
●Te tuku
Titiro ki
to tatou warenouse
Nga kaupapa
kei te whai waahi tatou
●Shaanxi Pucheng -50 ℃ kaupapa taika porowhita porowhita
●Ko nga rauemi whakapiri mo nga ipu waka LNG
Ko o maatau hua
ki te ao
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
| GB/T RULES | 0.15 | 1.60 | 0.90 | 0.20 | 0.30 | 0.30 | 0.035 | 0.035 | 0.08 |
| Nga Ture AWS | 0.15 | 1.60 | 0.75 | 0.20 | 0.30 | 0.30 | 0.035 | 0.035 | 0.08 |
| UARA TAUIRA | 0.065 | 1.40 | 0.45 | 0.03 | 0.01 | 0.006 | 0.011 | 0.007 | 0.01 |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WHAKAMAHI ℃xh | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | 400 | 490 | AW | 27/-45 | 20 | ||||
| Nga Ture AWS | 400 | 490 | AW | 27/-45 | 22 | ||||
| UARA TAUIRA | 490 | 590 | AW | 128/-45 | 28 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | |||||
| TE HIKO (Amp) | H/W | 80-110 | 100-130 | 130-180 | 180-230 | ||||
| O/W | 50-80 | 90-120 | 130-160 | - | |||||
