Konukaru konukaru Te hiko hiko ENiCrFe-7 Hononga hononga
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Fe | Nb | Cu | Mo | |
| GB/T RULES | 0.05 | 5.00 | 0.80 | 28.0-31.5 | ≥50 | 7.0-12.0 | 1.0-2.5 | 0.50 | 0.50 | |
| Nga Ture AWS | 0.05 | 5.00 | 0.75 | 28.0-31.5 | Tawhē | 7.0-12.0 | 1.0-2.5 | 0.50 | 0.50 | |
| UARA TAUIRA | 0.048 | 2.5 | 0.33 | 29.6 | 56.9 | 9 | 1.45 | 0.017 | 0.050 | |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | 360 | 550 | - | 27 | ||||
| Nga Ture AWS | - | 550 | - | 30 | ||||
| UARA TAUIRA | 450 | 650 | - | 41.5 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| TE HIKO (Amp) | H/W | 69-95 | 70-115 | 95-145 | |||||||
| O/W | 55-80 | 65-110 | 80-130 | ||||||||
He iti te momo hauwai hiko ringa, te hanganga ingoa (panui te taumaha) ko te 55Ni-29Cr-9.5Fe-3Mn-1.5Nb+Ta, nickel - chromium - iron alloy electrode.
Ko te nui o te ihirangi Cr ka pai ake te atete ki te pakaru o te waikura i roto i te radiation karihi me te taiao wai parakore.
Pewa pumau, ataahua te hanga, iti te pakaru, ngawari te para, te pai o te porosity, te mau o nga taonga miihini o te whakarewa whakarewa, me te pai o te waikura i roto i te waikura teitei me te hau whanariki kei roto.
-
Te whakamahine Sinopec me te Kaupapa Matū
-
Hainan Huasheng phenol whakaora pourewa
-
Te waro maitai, te tira kowiri tira
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Fe | Nb | Cu | Mo | |
| GB/T RULES | 0.05 | 5.00 | 0.80 | 28.0-31.5 | ≥50 | 7.0-12.0 | 1.0-2.5 | 0.50 | 0.50 | |
| Nga Ture AWS | 0.05 | 5.00 | 0.75 | 28.0-31.5 | Tawhē | 7.0-12.0 | 1.0-2.5 | 0.50 | 0.50 | |
| UARA TAUIRA | 0.048 | 2.5 | 0.33 | 29.6 | 56.9 | 9 | 1.45 | 0.017 | 0.050 | |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | 360 | 550 | - | 27 | ||||
| Nga Ture AWS | - | 550 | - | 30 | ||||
| UARA TAUIRA | 450 | 650 | - | 41.5 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| TE HIKO (Amp) | H/W | 69-95 | 70-115 | 95-145 | |||||||
| O/W | 55-80 | 65-110 | 80-130 | ||||||||
