He rino kowiri tira Waea rewa E2553T1-1 konganuku Ko nga taputapu hono
Taupānga
He pai mo te whakapiri i te rino wahanga takirua kei roto te 25% Cr kowiri tira, penei i te 00 cr25ni7mo4n, 03 cr25ni6mo3cu2n, UNS 32550 (Alloy255), etc.
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Tetahi atu | |
| GB/T RULES | 0.04 | 0.5-1.5 | 0.75 | 24.0-27.0 | 8.5-10.5 | 2.9-3.9 | 0.04 | 0.03 | Cu:1.5-2.5/N:0.10-0.25 | |
| Nga Ture AWS | 0.04 | 0.5-1.5 | 0.75 | 24.0-27.0 | 8.5-10.5 | 2.9-3.9 | 0.04 | 0.03 | Cu:1.5-2.5/N:0.10-0.25 | |
| UARA TAUIRA | 0.023 | 0.65 | 0.6 | 25 | 9 | 3.5 | 0.015 | 0.002 | Cu:1.70/N:0.12 | |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | - | 760 | - | 13 | ||||
| Nga Ture AWS | - | 760 | - | 15 | ||||
| UARA TAUIRA | - | 840 | - | 25 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 1.2 | 1.6 | ||||||
| Volt | 22-36 | 26-38 | ||||||
| Amp | 120-260 | 200-300 | ||||||
| Roa toronga maroke(mm) | 15-20 | 18-25 | ||||||
| Rere hau(l/min) | 15-25 | 15-25 | ||||||
Te ahurei
Ko nga waahanga matua he iti 25.5% Cr-9.5% Ni-3.4% Mo-2% Cu-0.18% N;
Ko te konganuku weld he austenitic ferrite biphase hanganga me te kaha nui me te pai o te atete ki te rua me te ahotea te pakaruhanga waikura.
He ngohengohe me te pumau te pewa, he iti te pakaru, he ataahua te hanga, he pai te tango para, te whangai waea pumau, me te pai o te mahi whakaahuru.
Whakaatuhia nga taipitopito
Pewa ngawari me te pumau
He iti te pakaru
Mo matou
Whakaatu wheketere
Take tono
Zhejiang Petrochemical 40 miriona taranata / tau te whakamahine me te kaupapa whakauru matū
Ko nga taonga whakapiri mo nga konumohe konumohe
Te pupuhi wheketere tūturu
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Tetahi atu | |
| GB/T RULES | 0.04 | 0.5-1.5 | 0.75 | 24.0-27.0 | 8.5-10.5 | 2.9-3.9 | 0.04 | 0.03 | Cu:1.5-2.5/N:0.10-0.25 | |
| Nga Ture AWS | 0.04 | 0.5-1.5 | 0.75 | 24.0-27.0 | 8.5-10.5 | 2.9-3.9 | 0.04 | 0.03 | Cu:1.5-2.5/N:0.10-0.25 | |
| UARA TAUIRA | 0.023 | 0.65 | 0.6 | 25 | 9 | 3.5 | 0.015 | 0.002 | Cu:1.70/N:0.12 | |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | - | 760 | - | 13 | ||||
| Nga Ture AWS | - | 760 | - | 15 | ||||
| UARA TAUIRA | - | 840 | - | 25 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 1.2 | 1.6 | ||||||
| Volt | 22-36 | 26-38 | ||||||
| Amp | 120-260 | 200-300 | ||||||
| Roa toronga maroke(mm) | 15-20 | 18-25 | ||||||
| Rere hau(l/min) | 15-25 | 15-25 | ||||||
Tuhia to korero ki konei ka tukuna mai ki a matou