Kowiri tira MIG ER410NiMo Mod taputapu Welding
Taupānga
He maha nga wa e whakamahia ana i roto i nga waa-aukati me te aukati i te waikura penei i te teihana hiko hiko me nga paera, penei i te ASTM CA6NM castings ranei rauemi rite, rahi iti 410, 410S, 405 rauemi turanga me te pera i runga i.
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
| GB/T RULES | - | - | - | - | - | - | - | - | - | |
| Nga Ture AWS | - | - | - | - | - | - | - | - | - | |
| UARA TAUIRA | 0.013 | 0.89 | 0.6 | 12.4 | 4.8 | 0.56 | 0.016 | 0.001 | 0.01 | |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | - | - | - | - | ||||
| Nga Ture AWS | - | - | - | - | ||||
| UARA TAUIRA | 712 | 855 | 78/0 | 21 | ||||
PARAMETER WELDING WHAKATOKANGAS:
| NGĀ WHAKATAKITANGA (mm) | 0.8 | 1.0 | 1.2 | ||||
| TE HIKO (Amp) | H/W | 70-150 | 100-200 | 140-220 | |||
| O/W | 50-120 | 80-150 | 120-180 | ||||
Te ahurei
Na te taapiri o Ni me Mo, ko tona kaha me tona pakeke he teitei ake i te 410.
Ka whakamahia mo nga kakahu e kaha ake ana me te aukati i te waikura.
Te whangai waea maeneene, te pewa pumau, te hanga ataahua, te iti o te pakaru, me te pai o te mahi whakaahuru.
Whakaatuhia nga taipitopito
Ataahua te ahua
Ataahua te ahua
Mo matou
Whakaatu wheketere
Take tono
Ko Tianshu Xing, he kaikawe hau maori (LNG) nui me te 174,000 mita pūtoru, i hangaia hei kopere
981 riu keri haurua ruku
Te pupuhi wheketere tūturu
KAUPAPA KAUPAPA:
| KONO(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
| GB/T RULES | - | - | - | - | - | - | - | - | - | |
| Nga Ture AWS | - | - | - | - | - | - | - | - | - | |
| UARA TAUIRA | 0.013 | 0.89 | 0.6 | 12.4 | 4.8 | 0.56 | 0.016 | 0.001 | 0.01 | |
TE KAUPAPA MAHI:
| WHAI | KAUPAPA KAUPAPA(MPa) | TE KAUPAPA KAUPAPA(MPa) | WARA WHAKAMAHI J/℃ | WHAKARANGA(%) | ||||
| GB/T RULES | - | - | - | - | ||||
| Nga Ture AWS | - | - | - | - | ||||
| UARA TAUIRA | 712 | 855 | 78/0 | 21 | ||||
NGĀ TAWHE WELDING E WHAKATAHIngia ana:
| NGĀ WHAKATAKITANGA (mm) | 0.8 | 1.0 | 1.2 | ||||
| TE HIKO (Amp) | H/W | 70-150 | 100-200 | 140-220 | |||
| O/W | 50-120 | 80-150 | 120-180 | ||||
Tuhia to korero ki konei ka tukuna mai ki a matou